Medium bodied clear cement for use on PVC pipe and fittings. Up to 6 in Dia. Formulated for fast initial set-up at temperatures down to -15 to 100 deg F. SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Non-pressure, DWV, up through 4 in Dia: no primer needed where local codes permit. Meets ASTM D-2564.
| Applicable Materials | PVC |
|---|
| Application Method | Brush, Roller |
|---|
| Boiling Point | 151 deg F |
|---|
| Color | Gray |
|---|
| Compositions | Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed |
|---|
| Container Type | Can |
|---|
| Curing Time | 2 hr |
|---|
| Density | 7.89 lb/gal |
|---|
| Drying Time | 15 min |
|---|
| Flammability Rating | 3 |
|---|
| Flash Point | -4 deg F |
|---|
| Form | Liquid |
|---|
| Net Content | 16 oz |
|---|
| Odor/Scent | Solvent |
|---|
| Specific Gravity | 0.95 |
|---|
| Temperature Rating | -15 to 110 deg F |
|---|
| Viscosity | 500 cPs |
|---|
| VOC Content | 510 g/L |
|---|
